Manual page
stripes
appear:
• The toner cartridge may be installed
reinsert.
feed into the printer:
• Turn over the stack of paper in the tray. Also
image repetitively
appears on a
next few sheets
or loose toner,
light print or
contamination
occurs.
of 2,500 m (8,200 ft) or above.
The high altitude may affect the print quality
such as loose toner or light imaging. You can set
this option through Printer Settings Utility or
Printer Tab in printer driver’s properties. Refer
to the Software Section for details.
message appears
during installation.
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
LPTx” message
appears.
message.
Fault”, “Exception
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
and try printing again.
when several printer languages are being used.
printer timeout error
occurred,”
messages appear.
Just keep waiting until the printer finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
information on Windows error messages.
click the desired selection next to the PostScript errors section.
can not be
printed.
driver may not
be installed
correctly.
version is available for
printing.
driver, see the Software
Section.
Error” message
appears.
was too
complex.
complexity of the page.
error page
prints.
not be
PostScript.
PostScript job. Check to see
whether the software
application expected a setup or
PostScript header file to be sent
to the printer.
document in
Macintosh with
Acrobat Reader
6.0 or higher,
colors print
incorrectly.
setting in the
printer driver
may not be
matched with
that in Acrobat
Reader.
setting in your printer driver
matches that in Acrobat
Reader.