Manual page

Samsung SCX-5835FN User Manual (ver.1.00)
Faxing_ 82
: Removes all digits of the selected entry.
Remove : Removes the selected fax number entry.
Remove All : Removes all the fax numbers in the input area.
Address : Picks up the frequently used fax numbers directly from your
machine or from SyncThru™ Web Service. (See "Setting up a fax phone
book using SyncThru™ Web Service" on page 86.)
Duplex : Selects whether the machine send faxes one side of the
original, both sides of the original.
Resolution : Adjusts the resolution options.
Advanced tab
Original Size : Selects the size of the original document. Press OK to
update current setting.
Delay Send : Sets the machine to send a fax at a later time without your
intervention. (See "Delaying a fax transmission" on page 83.)
Priority Send : Sends an urgent fax before reserved operations. (See
"Sending a priority fax" on page 84.)
Polling : Used when the receiver requests the document to be faxed
remotely at sender's absence or vice versa. In order to use the polling
function, the originals must be previously stored in the machine. (See
"Storing the originals for polling" on page 86.)
Mailbox : Used to store a received fax or originals in the machine
memory which are ready to be polled. You can use a mailbox on the
same machine you are using, or the one on a remote machine. Each
mailbox has a corresponding mailbox number, name and password.
(See "Using mailbox" on page 87.)
Back : Returns to the Basic tab.
Image tab
Original Type : Enhances the fax quality based on the type of the
original document being scanned. (See "Original Type" on page 85.)
Darkness : Adjusts the level of lightness or darkness of the fax. (See
"Darkness" on page 85.)
Erase Background : Reduces dark backgrounds or paper patterns as
in newspaper originals. (See "Erase Background" on page 85.)
Color Mode : Selects whether the user sends the fax in mono or color.
(See "Color Mode" on page 85.)
Back : Returns to the Basic tab.
SENDING A FAX
This part explains how to send a fax and the special methods of
transmission.
When you place the originals, you can use either the document feeder
or the scanner glass. (See "Loading originals" on page 44.) If the
originals are placed on both the document feeder and the scanner
glass, the machine will read the originals on the document feeder first,
which has higher priority in scanning.
Setting the fax header
In some countries, you are required by law to indicate your fax number on
any fax you send.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter
password and press OK. (See "Setting the authentication password" on
page 41.)
3. Press the Setup tab > Fax Setup > Machine ID & Fax.
4. Touch the input area to enter the machine name and your fax number.
5. Press OK.