Manual page
that came with your PC for further information on Windows error
messages.
repetitively appears
on the next few
sheets or loose
toner, light print, or
contamination
occurs.
altitude of 1,000 m (3,281 ft) or above. The
high altitude may affect the print quality from
loose toner or light imaging. You can set this
option through Printer Settings Utility or the
Printer Tab in printer driver’s properties. See
"Altitude Setting after Software Installation" on
page 3.4.
message appears
during installation.
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
LPTx” message
appears.
message.
Protection Fault”,
“Exception OE”,
“Spool32”, or
“Illegal Operation”
messages appear.
and try printing again.
machine timeout
error occurred.”
messages appear.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
several printer languages are being used.
PostScript errors occur, open the Print Options window and click
the desired selection next to the PostScript errors section.
cannot be
printed.
driver may not be
installed correctly.
section.
version is available for
printing.
representative.
Error” message
appears.
too complex.
the complexity of the page or
install more memory.
error page
prints.
not be PostScript.
is a PostScript job. Check to
see whether the software
application expected a setup
or PostScript header file to
be sent to the machine.
tray is not
selected in the
driver.
has not been
configured to
recognize the
optional tray.
properties, select the Device
Settings tab, and set the
Tray option of the Installable
Options section to Installed.
a document in
Macintosh with
Acrobat
Reader 6.0 or
higher, colors
incorrectly.
setting in the
printer driver may
not be matched
with the one in
Acrobat Reader.
setting in your printer driver
matches the one in Acrobat
Reader.