6.5
<Maintenance>
3
Grasp the handles on the empty toner cartridge and pull to remove
the cartridge from the machine.
Caution
If you open the front door, be careful not to touch the
underneath of the control panel (the lower part of the fuser unit).
The temperature of the fuser unit might be high and could
damage your skin.
Note
When you open the front door and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer
belt.
4
Take a new toner cartridge out of its package.
Caution
• Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
• To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5
Holding both handles on the toner cartridge, thoroughly rock it from
side to side to evenly distribute the toner.
6
Place the toner cartridge on a flat surface, as shown, and remove
the paper covering the toner cartridge by removing the tape.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash it in cold water. Hot water sets toner into fabric.
7
Make sure the color of the toner cartridge matches the color slot and
then grasp the handles on the toner cartridge. Insert the cartridge
until it clicks into place.
8
Close the front cover. Make sure the cover is securely latched, and
then turn the machine on.
Caution
If the front cover is not completely closed, the machine will not
operate.