Manual page
you select Auto, your machine supplies the
paper from the multi-purpose tray first, then the
tray 1, and tray 2 for the last. So if any tray is
empty, then the machine tries to search the
paper from the next available tray. (See page 3.5
for more information)
from Paper Source and the selected tray is
empty, you can set the machine to automatically
print from other trays.
If this menu item is set to Off, the machine does
not print until you insert paper into the specified
tray.
resolution is high, the clarity of the printouts is
sharper, but the print time may take longer.
• Draft: If the printer language is PCL and your
best speed and printing quality. This option is
available only with PCL driver.
certain business graphics, that will benefit
from enhanced line screening.
control panel determines the language of the text
that appears on the control panel display and for
printing information. (See page 3.4 for more
information)
extended period of time, power consumption is
automatically lowered. You can set how long the
machine waits before going to power save. (See
page 3.5 for more information)
continues printing when it detects paper that is
not matched to your paper setting.
• Off: If a paper mismatch occurs, the message
remains off-line until you insert the correct
paper.
for 30 seconds then automatically clears the
message and continues printing.
your altitude.
carriage return to each line feed, which is useful
to the Unix user or DOS user.
Refer to the following samples:
is active before it must print. The machine
handles incoming data as a single job, if it comes
in within the specified time. When an error
occurs while processing data from the computer
and the data flow stops, the machine waits the
specified amount of time and then cancels
printing if data flow does not resume. (See page
3.4 for more information)
within the machine and check supplies' life. You
can clean fuser components. (See page 6.1 for
more information)
printer's factory default settings.
languages from the computer and the machine
are different, the printing quality can not be
confirmed. It is recommended to set this menu to
Auto to switch the proper language.