7
6
1
Press the MENU button on the remote control.
Press
M and ❿ to select “Clock set/adjust.”
2
Press the ❿ button to select AUTO.
3
Clock data CH : If you select AUTO, the VCR will
automatically tune to a channel providing time data.
This may take the VCR up to 7 minutes. You can also
tune the VCR manually to a channel that you know
carries time information (PBS channel) with the ➛ ❿
buttons.
Time zone : If you select AUTO for your time zone, the
VCR sets the clock using the first Coordinated Universal
Time information it finds. If the time is not correct, select
another time zone.
Daylight Savings Time : If you select AUTO, the VCR
sets the clock using the DST information broadcast in the
signal (channel). If you select YES, Daylight Savings
Time is observed:
Spring : The clock changes forward one hour on the first Sunday in April
Autumn : The clock changes back one hour on the last Sunday in October.
The VCR has an internal clock which is used to turn the VCR on and off for timer recording.
Automatically Setting the Clock
When the AUTO CLOCK SET feature is selected, the VCR automatically updates its internal clock using
Coordinated Universal Time information transmitted by some broadcast stations. If the VCR is connected to a
cable box or DSS
®
box, cable box or DSS
®
box setup must be completed first (see page 4). Clock is activated
when the cable box is tuned to the PBS channel.
4
Press the MENU button after setting up the clock.
If you selected AUTO CLOCK, the VCR clock will be
set automatically when the VCR is turned off.
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time.
Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 7 minutes, set the
time and date manually.
VCR Setup
Timer recording
❿ Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[
❷
/❿]
[MENU/EXIT]
❿ AUTO
MANUAL
Select [
❷
] and press [
❿]
[
❷
/❿]
[MENU/EXIT]
❿ Clock data CH: [AUTO]
Time zone : [AUTO]
Do you observe [AUTO]
DST in summer?
[
❷
/➛❿] [MENU/EXIT]
MAIN MENU
CLOCK SET/ADJUST
CLOCK SET/ADJUST
1
Press the MENU button on your remote control.
The Main Menu will appear on screen.
2
Select the item you want to adjust using the
❷
buttons.
Press the ❿ button to enter the selected item.
: PLAY/STILL or
L cursor
: STOP or
M cursor : MENU ON or OFF
: REW or ➛ cursor : F.F or ❿ cursor
1
To select the language for the on-screen menu display,
press the MENU button on the remote control.
2
Press the
M button on the remote control to select
“Language.”
3
Press the ❿ button to select the language you want for
the on screen menus (English, Spanish, French).
MAIN MENU
❿
Timer recording
Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[
❷
/
❿]
[
MENU/EXIT
]
MENU
Using Menus and the Remote Control
Your VCR has on-screen menus that allow you to access and control the VCR’s programmable features.
You will use the buttons on the remote control or on the front panel to work with the on-screen programming.
Each button works not only PLAY, STOP, F.F, REW but also as a shift cursor in the on screen menus.
If you want to exit any on-screen menu, simply press the SEARCH/EXIT button on the remote control.
Selecting the On-Screen Language
Timer recording
Clock set/adjust
Channel setup
VCR function setup
❿
Language/Lengua/Langue
[
❷
/
❿]
[
MENU/EXIT
]
MENU
MAIN MENU
VCR Setup
Setting the Clock
02094A VR8460/5460/XAA-web 12/27/03 9:42 AM Page 6