S
ystem Setup
English - 33
CH Digit Lock
Select the sub item(Off or Lock to two digits) using the ▲▼ buttons,
then press the ENTER button.
• Off : Select this when your cable box or satellite receiver (set top box) only
accepts a three or more digit channel numbers. Normally select this.
• Lock to two digits : Select this when your cable box or satellite receiver
(set top box) only accepts a two digit channel number.
Mode for SET button
Some cable box or satellite receiver (set top box) require you to press
SET after pressing the channel number. If your cable box or satellite
receiver (set top box) operates this way, follow the instructions below to
set Mode 1 or 2.
Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then
press the ENTER button.
• Off : No code is sent when the SET button is pressed. Normally select
this.
• Mode 1 or Mode 2 : Sends the channel number you entered.
If "Mode 1" does not work, try "Mode 2."
If your cable box or satellite receiver (set top box) does not
respond to either setting, contact the manufacturer of the cable
box or satellite receiver (set top box).
Brand Code
Enter the brand code of your cable box or satellite receiver (set top box)
using the number buttons, then press the ENTER button.
(See "Cable Box/Satellite Receiver Brand Code Table" on pages 81~83.)
If you cannot get the recorder to control your cable box/satellite
receiver (set top box), check the connection and position of the IR
Blaster cable.(page 15) If your cable box or satellite receiver still
does not operate with this recorder, contact your cable company
to see if they can provide you with a compatible cable box or
satellite receiver.
This menu may not work depending on your cable box or satellite
receiver (set top box).
Video Input
You can watch video from an external component through the AV
1(Composite) or S-video input jacks.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select System, then press the ENTER or ►
button.
4. Press the ▲▼ buttons to select Video Input, then press the ENTER or
► button.
5. Press the ▲▼ buttons to select AV 1 or S-Video, then press the
ENTER or ► button.
▌
▌
■
■
▌
■
■
Cable Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
Control :
Off
►
Connection :
AV1
►
CH Digit Lock
: Off
►
Mode for SET button : Off
►
Brand Code
: 0000
►
Off
Mode 1
Mode 2
MOVE
ENTER
RETURN
EXIT
Cable Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
Control :
Off
►
Connection :
AV1
►
CH Digit Lock
: Off
►
Mode for SET button : Off
►
Brand Code
: 0000
►
Off
Lock to two digits
MOVE
ENTER
RETURN
EXIT
System
DVD-Recorder
No Disc
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
VCR
►
Cable Box Control
►
Video Input
: AV 1
►
DVD EP Mode Time
: 6 Hours
►
Chapter Creator
: Off
►
Quick Recording
: Off
►
Anynet+(HDMI-CEC) :
On
►
AV 1
S-Video
Cable Box Control
DVD-Recorder
No Disc
Timer Rec.
Setup
Enter the brand code of your Cable box.
0
0
0
0
NUMBER
0~9
ENTER
RETURN
EXIT
01287A(01)-VR357-XAA-ENG.indb 33
01287A(01)-VR357-XAA-ENG.indb 33
2007-01-22 오전 10:37:08
2007-01-22 오전 10:37:08