Manual page
(set top box). The DVD-VR357 does not have a TV Tuner , so you must connect a Cable Box or Satellite receiver
(set top box) to watch or record TV through TV through this unit.
You can record channels by selecting the channel on the cable box or satellite receiver (set top box).
You cannot record one channel while watching another channel.
Be sure that the cable box or satellite receiver (set top box) is turned on.
1. Find and Connect the included IR Blaster cable into the
B. Hold the Cable box’s remote so that it touches the
On and Off (Figure 2).
move the remote; holding down the button will not work.)
D. When the cable box powers On, you have found the
or underneath the cable box approximately 1 inch in
front of the sensor you found in 2 .
Use the double-sided tape to secure the IR Blaster.
You must select a cable box brand from the table
on pages 81~83. If you do not know the brand
name, please contact your cable provider.
After setting up your cable box or satellite receiver
(Set top box) with the DVD Recorder & VCR
through the IR Blaster cable, you need to set up
the Set Top Box Control menu.
(See pages 32~33)
The DVD-VR357 does not have a TV Tuner.